Single Strand Spacer Tiger Tail Bracelet

Skills required/taught: crimping, using callots and opening and closing jump rings

Tools required: Chain nosed pliers required

Materials needed:
20cm tiger tail thread
2 x callots
1 x lobster clasp
2 x jump rings
At least 14 x 2mm crimps (2 crimps per bead plus two crimps for the ends)
Minimum 6 beads

Step 1:
Add a crimp to the middle of the tigertail, crimp and add a bead. This is your centre bead. Add a crimp to the other side of the bead and crimp.

Step 2:
Decide on the distance you would like between the beads. Add a crimp at the distance you want between beads and crimp. Add the bead and then a crimp. Repeat on the opposite side. Continue until all the beads are added.

Step 3:
Once you have added all the beads add a callot, followed by a crimp. Crimp 2mm from the end of the thread and feed the callot over the crimp. Repeat on the other side. Add the lobster clasp on one end with the jump ring and a jump ring on the other.